Instructions / Assembly

16
12
SERV.
Service
BRINE RINSE REFILL
BA.WA.
BACKWASH
Manual Regeneration
To start an immediate regeneration turn the knob clockwise from the service position (9:00) to the 10:00 position. Within a few seconds the an immediate regeneration will
begin. Using the knob you can manually advance to the next position. Pressing any button will also advance to the next position.
For Delayed Regeneration, Press Settings Button Once
Calculating Compensated Hardness for Water where Iron or Manganese is Present
From your water analysis.
Iron x 4 = grains of hardness and or Manganese x 8 = grains of hardness. These numbers can be found on your water analysis report, and the equivalent grains of hardness should
be added to your total hardness number. The new sum of these numbers is the hardness to be entered during programming below.
EG
Iron = 0.5 ppm x 4 = 2.0 gpg
Mang = 0.3 x 8 = 2.4 gpg (always round up) = 3.0 gpg
Hardness = 15 gpg + 2.0 (compensated iron) + 3.0 (compensated manganese) =20 gpg
enter 20 as the hardness when programming below.
Iron ________ x 4 + Manganese x 8 ____________ + Hardness = Total Hardness ________