Instructions / Assembly

4 5
B
Twin Tank Model
A
Models A (Inches) B (Inches)
57” 9"
63” 10"
Model
Capacity Grains Flow Rate
Mineral
Tank
Size
Resin
Cu. Ft.
Brine Tank Size
Inches
Salt
Cap
Lbs
Shipping
Weight
Lbs
@ 15 lbs/cu ft
Factory
Setting
@10 lbs/
cu ft)
@6 lbs/
cu ft
Service
USGPM
Backwash
USGPM
WH-HD-IRN-MG-948
30, 000 26,500 22,000 10.0 2.0 9 x 48 1.00 18.1 X 34. 7 270 1 20
WH-HD-IRN-MG-1054
45, 000 39,750 33,000 12.0 2.4 10 x 54 1.50 18.1 X 34.7 270 151
SPECIFICATION
Working Temperature = 34-110°F (1-43°C)
(Do not subject the unit to freezing temperatures)
Working Pressure = 30-125 PSIG (137-861 kPa)
Voltage = 120V / 60 Hz
Pipe Size = 3/4” or 1”
• At the stated service flow rates, the pressure drop
through these devices will not exceed 15 psig.
• Changing salt settings from factory setting may
require changing injector sizes to achieve stated
capacities
• The manufacturer reserves the right to make product
improvements which may deviate from the
specifications and descriptions stated herein,
without obligation to change previously manufactured
products or to note the change.
* Do not use water that is microbiologically unsafe
without adequate disinfection before or after the
system.
* Iron content must not exceed 1 ppm. Beyond 1 ppm
an iron softener must be used. Periodic media
cleaning is required by Pro-Res Cleaner is iron level
exceed 0.3 ppm
SYSTEM DIMENSIONS
WH-HD-IRN-MG-948
WH-HD-IRN-MG-1054