Instructions / Assembly



Tools Required: None

1. 

construction document.

2. Adjust screw to slightly short of the length needed between footer and load

carrying beam at installation location (Figure

➊

3. 

nut and screw on the footer (adjustable end down) (Figure

➋

4. 



and the footer below (Figure

➌

5. Additional screw adjustments may be made during construction to keep

ﬂoor level

6. 

(Figure

➍





LOAD





FOOTER



speciﬁc installation requirements in your area.

➋



➊ ➍

➌

adJustable COlumNs

iNstallatiON iNstruCtiONs

TIGER BRAND JACK POST | 330.576.1750 | TigerBrandJackPost.com

PAGE 1
ADJUSTABLE COLUMNS Load carrying beam INSTALLATION Instructions Installation Time: Approximately 15 Minutes Tools Required: None 1. Choose the correct size and strength Mono-Post for the project based on construction document. 2. Adjust screw to slightly short of the length needed between footer and load carrying beam at installation location (Figure ➊). 3. Place Mono-Post vertically between footer and beam with the adjustment nut and screw on the footer (adjustable end down) (Figure ➋). 4.