Technical Specifications

ManualsBrandsTiger Claw ManualsDeck ScrewsTC-3 Hidden Deck Fastener - 50 sq. ft. Box

TC-3S COMPOSITE, MAHOGANY, & PVC FASTENER:

PRODUCT DESCRIPTIONS

Heavy Gauge Stainless steel fastener with black oxide coating to better hide fastener

between boards.

PRODUCT REQUIREMENTS

When using Tiger Claw fasteners please review and comply with these requirements to

obtain proper installation. Failure to follow these requirements may result in deck failure

and/or void of warranty.

Inspect decking material prior to installation. Omit any planks that contain hooks, twists,

splits, cracks, or other defects. Always install decking with the crown upward.

When using:

Fastener provides an automatic 3/16" spacing, but will accommodate up to 5/16". We

recommend spacing according to the decking manufacturer specifications. Check the

decking manufacturer’s installation guide for spacing details. If decking is less than

15/16" in thickness, pre drilling may be required. Test fasteners in decking before

installation begins. Product Specifications

PRODUCT FEATURES & COMPATIBILITY

Developed specifically for use with composite or synthetic decking materials and

medium density mahogany.

TC-3S will work in the following composite and synthetic decking lumber varieties:

 ChoiceDek

 Geo Deck

Summary of content (4 pages)

PAGE 1
TC-3S COMPOSITE, MAHOGANY, & PVC FASTENER: PRODUCT DESCRIPTIONS Heavy Gauge Stainless steel fastener with black oxide coating to better hide fastener between boards. PRODUCT REQUIREMENTS When using Tiger Claw fasteners please review and comply with these requirements to obtain proper installation. Failure to follow these requirements may result in deck failure and/or void of warranty. Inspect decking material prior to installation.
PAGE 2
       Moisture Shield Trex Accents Trex Escapes Tuf-Deck Ultra Deck Hollow Veka Weather Ready (Gossen) TC-3S will work in the following medium density hardwood decking lumber varieties:    Cambara Meranti Other Medium Density Mahogany Please consult your composite manufacturer or ask us first if you plan to use any other composite or synthetic material not listed above in your decking project.
PAGE 3
Recommended Materials Use with most polyethylene based composites and vinyl decking (5/4” or thicker Trex, Veranda, Boardwalk…) Appearance Semi gloss black finish, rectangular body with horizontally oblong shaped hole along lower bend. Two sets of large opposing prongs on top. 3/16” spacing flanges on inner prongs. Dimensions .50” h x 2.00” w x 1.00” d .060 304 ¼ roll hardened stainless steel (Semi-magnetic) Yield strength 64.5 kpsi Tensile strength 145.7 kpsi Material Or: .
PAGE 4
Package Content Retail Box: (90) Tiger Claw fasteners, (1) Installation instruction sheet, (1) Installation Block, (1) #2 sq. drive bit (1) Support Addendum Retail Unit Dimensions (90 Piece Box): 4.75” h x 5.50” w x 5.25” d, 3.0 lb A fastener is needed at every intersection of a joist and decking board. When using 5.5” decking with 16” on center joists: 90 pcs. box covers approx. 50 sq. feet Coverage Or: Coverage Estimator Square footage x 1.