User Manual

21
20
English
6
2
4
•
6
5
37
Timer function
Time to complete cooking can be preset.
• Select“Timer”andsetthedesiredcompletion
time. The start of cooking is automatically adjusted
so that the cooking is completed at the preset
time.
• The preset timer settings are stored in the
memory.
Note
● Example:If“Timer”issetto11:30,cookingis
completed at 11:30.
1
Connect the power cord.
2
Check the current time.
Blinks
• See P 42 for the procedure to set the
current time.
3
Press the [Menu] key to select
the desired menu.
The symbol blinks while the menu is being
selected.
Blinks
• It is not necessary to press the [Menu] key if
the desired menu is already selected.
4
If you select the “Porridge”
menu, use the [Hour] and [Min]
keys to set the desired cooking
time.
• Each time the [Hour] key is pressed, the set
time increases by 5 minutes. Each time the
[Min] key is pressed, the time decreases by 5
minutes.
• The cooking time can be set between 40 to
90 minutes in increments of 5 minutes.
Increases by
5 min.
Decreases by
5 min.
• The default setting is 60 minutes. Adjust the
time as desired.
Using the Timer Function
5
Press the [Timer] key.
The Timer lamp blinks.
Blinks
Blinks
• The previously preset time is displayed. It is
not necessary to set the timer again when
setting the Timer function at the same time.
Note
● The Timer function is not available in the following
cases.
• Whenthe“Synchro-Cooking”,“Quick”,“Mixed”,
or“SlowCook”menuisselected
• When“0:00”isblinkingonthedisplay
● If the Keep Warm lamp is lit, press the [Keep
Warm/Cancel]keytoturno󰀨thelamp.(TheTimer
function is not available while the Keep Warm
lamp is lit.)
● Rice may become dark and crispy when the timer
setting is extended. If this is an issue, thoroughly
rinse the rice.
Timer setting guidelines for each menu
(The following table can be used for rinse-free
rice as well.)
Menu Timer setting guideline
Plain 50 minutes or more
Short 1 hour or more
Brown 1 hour and 30 minutes or more
Porridge Cooking time + 2 minutes or more
• When the preset time is less than the timer
setting guideline, cooking may not be completed
at the preset time.

Sounds emitted by the rice cooker
● If the rice cooker is not operated within 30
seconds after pressing the [Timer] key, the rice
cooker will beep 2 times (short beeps).
● If the [Timer] key is pressed while the rice cooker
is in a state where the Timer function is not
available, the rice cooker will beep 2 times (short
beeps).
6
Use the [Hour] and [Min] keys to
set the desired completion time.
Press the [Hour] key to set the time in
increments of 1 hour and the [Min] key to set
it in increments of 10 minutes.
Hold down the corresponding key to change
the time more rapidly.
Blinks
Note
● Do not set the timer to more than 12 hours, as it
may result in spoiled rice.
7
Press the [Start] key.
The Timer lamp lights up and the Timer
function is set.
The rice cooker makes one short and one
longbeepwhenthe“Plain”menuisselected
and one long beep when other menus are
selected.
On
On
• If you make a mistake or otherwise want
to reset the timer, press the [Keep Warm/
Cancel] key and repeat the procedure
from
step
3
on P 20.