User Manual

[e-mail]
17
3. Privacy Mask
Use Privacy Mask if cameras are mounted at home or in an office that requires
privacy. This function covers or “blurs” some areas of the videos. Drag a numbered
black square from the upper left to cover the area you wish to blur. Don’t forget
to check the Area box to enable the function. Then, click Apply.
4. PTZ
*You may set up the PTZ cameras here or via Live View > PTZ Camera.
If you have PTZ cameras (not included in the package), the basic setup can be
done on this page. Make the changes using the drop-down menus.
Mode UTC:
• UTC Supported Protocols: AUTO, TVI, AHD1080P, AHD720P, CVI
Check Change the setup Mode to UTC, select the Protocol for your camera. Check
Enable box to enable the settings, then Apply.
Mode RS485:
• Supported Protocols: Pelco-D/Pelco-P/Merit LiLin Protocol 1/Merit LiLin
Protocol 2/Samsung/SamsungII/LG-MultixE
• Supported Baud Rate: 2400/4800/9600/19200
Change the setup Mode to RS-485, select the Protocol and Baud Rate for your
camera. Check the Enable box to enable the settings, then Apply.
Then back to Live view - Toolbar - click PTZ to enter the PTZ control interface.
Choose the Camera (CHx), then adjust the view of that camera to the preset
location that you would like to define, then click the flag button to enable
the preset location.
Click Touring Setup to enter the touring setup page, then enable and choose
the preset locations and duration time. Click OK to complete the setup.
Then go back to the PTZ Control Interface to enable the Touring.
Main Menu