User Manual

service@tigersecu.com
29
In the Maintenance Menu, you can view the DVR information, set up the
maintenance cycle, upgrade the software, check log files, reset to factory
defaults, and import/export files by USB drive.
1. Maintenance
On the Maintenance page, Auto Rebooting the DVR from time to time helps
it perform well. (This is disabled by default).
To set up Auto Reboot, select Every Day or Every Week (If Every Week, select
a Day and Time). Click Apply.
Click Shutdown to shut the system down.
1. Import/Export
On the Import/Export page, you can import or export the DVR configurations.
A USB flash drive needs to be inserted into the USB slot at the back of the DVR
to import or export data.
2. Upgrade
Contact us via service@tigersecu.com for the latest firmware. Then follow the
instructions to download the upgrade firmware to a USB flash drive and click the
button Upgrade from USB Flash Drive to upgrade the firmware.
OTA upgrade (upgrade from the cloud) is supported if your DVR current
firmware version is 8638000020200514/8638000020200520 or later. Contact us
via service@tigersecu.com if further assistance is needed.
Main Menu