TS4-A-2F Quick Start Guide

Note: When installing TS4-A-2F, always connect the input cables to the PV modules
before connecting the TS4-A output cables in series.
1. Connect PV modules to TS4-A-2F inputs
2. Connect TS4-A-2F outputs in series
If disconnecting TS4-A-2F, always disconnect the TS4-A-2F output cables from the string
before disconnecting the input cables from the PV modules.
RSS Transmitter must be powered OFF during TS4-A-2F installation.



TS4-A-2F Installation Quick Start Guide
support.tigoenergy.com
[e-mail]
International: 00800.2255.8446
Americas: +1.408.402.0802
Manual
+ +
- -
Tigo Rapid Shutdown
DONOT DISCONNECT
UNDERLOAD
4 - 123A
TS4-A-2F
+ +
- -
Tigo Rapid Shutdown
DONOT DISCONNECT
UNDERLOAD
4 - 123A
TS4-A-2F
PV Module 1
PV Module 1
PV Module 2
PV Module 2
1
2
Tigo Rapid Shutdown
DO NOTDISCONNECT
UNDER LOAD
DANGER
NEC690.12-2017and C22.1-2015 Rule64.218
For installation with frameless modules,
remove metal clips and bolt TS4-A to rail.
Removable clips
Mounting holes (M8)
If connecting 2F to a single PV module:
• Connect PV module to Input 1
• Connect Input 2 cables together