User's Manual

TigoMaster 2TH User Manual

Page 15 of 36

CONFIDENTIAL

Safety

1.1 General note

The documentation in the form of a user manual, an operating instruction manual or other manual types,

as well as the accompanying texts have been created for the use of the products by qualified personnel.

When using the products, all Safety Messages, Integrated Safety Messages, Property Damage Messages

and all valid legal regulations must be obeyed. Technical knowledge is presumed. The user has to assure

that all legal regulations are obeyed.

1.2 Intended use

The device EtherNet/IP IO-Link Wireless Master TIGOMASTER 2TH is used to acquire and output

field signals via IO-Link to sensors, actuators and hubs that are sent or received to a higher-level control

system.

The device described in this document serves as a decentralized input/output device in an EtherNet/IP

network.

The product is intended for indoor use in industrial environments without weathering (no direct sunlight,

no salt water or salt spray).

The device has been developed for a working environment that requires protection class IP 67.

Applications other than those described here are not permitted.

1.3 Personnel qualification

The device may only be mounted, configured, operated, or demounted by qualified personnel. Job-

specific technical skills for people professionally working with electricity must be present concerning the

following topics:

- Safety and health at work

- Mounting and connecting of electrical equipment

- Measurement and analysis of electrical functions and systems

- Evaluation of the safety of electrical systems and equipment

- Installing and configuring IT systems