Let’s get this fire started PATIO FIRE PIT USER GUIDE
Table of contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Extinguishing. . . . . . . . . . . . . . . . . . . . . . . . . . 8 Care & Maintenance. . . . . . . . . . . . . . . . . . . . .
Fire Pit safety (cont.) • DO NOT cover the Fire Pit with the cloth cover until it has completely cooled down approximately 12 hours. • Always use the Fire Pit in accordance with all applicable local, state, and national codes. Contact your local fire department for details. • DO NOT alter or modify the Fire Pit in any manner. • The Fire Pit should be inspected and cleaned after every use. • When lifting and moving the Fire Pit always wear protective clothes/gloves to prevent injury.
Assembly Light your Fire Pit OR CAUTION: Some parts may contain sharp edges. Wear protective gloves when assembling, moving, or handling product. C You can use Wood Packs (see below) or natural cut firewood (see page 8) to light your fire. A A B F ST EP 1 STE P 2 Remove the ash pan (F) and cone (C) from the Fire Pit (A) and set aside. Separate the Fire Pit (A) from the foot ring (B) and place the foot ring on its feet.
Light your Fire Pit using natural cut firewood 16 INCHES LESS THAN 16 INCHES Care & maintenance • Remove the center cone (C) from the Fire Pit. This will increase airflow and make more room for the firewood to sit below the rim of the fire pit. This will help reduce smoke. • Stack kindling, newspaper, a commercially-available fire starter or TIKI Brand Fire Starter, in the center of the Fire Pit. ® • Build larger pieces of wood around the fire starter.
Frequently asked questions Can I use firewood in the Fire Pit? Yes. Never use “green” wood. For example, freshly cut wood from a live tree (cut less than six months prior to each use.). The moisture content is too high and will result in smoke and incomplete combustion. Logs should be less than 16 in. in length. At least one portion of every log should be touching the bottom of the flame basin for maximum stability. Approximately 3 standard split cord wood logs should fit.
TI KI BRAND.
