Instructions / Assembly

USER GUIDE
11
Frequently asked questions
Limited Warranty
Visit tikibrand.com/customer-service/our-guarantee or contact us at 1-888-473-1088 for more information.
For information on patents go to tikibrand.com/patents
WARNING: This product and combustion products emitted when this product is burning can expose you to
chemicals including carbon monoxide which is known to the State of California to cause birth defects or other
reproductive harm, and lead which is known to the State of California to cause Cancer and birth defects or
other reproductive harm. For more information go to www.P65warnings.ca.gov.
Where can I put my Fire Pit?
The Fire Pit should not be used closer than 15 ft. to
any walls, structures or buildings, and should not be
placed on any combustible surface such as wood,
dry grass, leaves or mulch. Flames may reach a
height of 3 ft. above the top of the Fire Pit. Further,
the Fire Pit should not be used under a patio roof,
any low hanging branches, trellises or overhangs of
any kind, including covered porches. If used on a
grassy area, you should have a non-flammable, heat
resistant mat placed under the Fire Pit.
How do I get the least amount of smoke
possible?
The Fire Pit was designed for a low smoke burn,
and here are a few factors that can impact how low
smoke your fire is:
1. TIKI
®
Wood Packs were designed specifically for
this purpose and will require the least amount of
eort. 2. When using firewood make sure it is dry,
seasoned, cut to less than 16”, and positioned under
the top edge of the Fire Pit. Starting your fire with
the TIKI
®
Fire Starter will decrease the amount of
time needed to get your fire up to a temperature for
emitting as little smoke as possible. 3. If you have
done steps 1 or 2 and are still experiencing smoke,
make sure your pit has been cleaned thoroughly.
Any leftover ash can hinder airflow and create
unwanted smoke.
What are the best practices for storing my
Fire Pit?
Keep the Fire Pit in a covered environment away
from moisture. Keep it out of reach of children
and pets.
How often do I need to empty the ash
catcher pan?
The pan should be emptied after every use.
How do I clean out the ash from the bottom
of the Fire Pit?
Remove the dome insert and carefully sweep ash
through bottom holes. Once all the ash has been
swept through the holes, remove the top portion
of the Fire Pit and dispose of ash properly.
How do I clean the Fire Pit?
If soot or ash has accumulated on the outside of
the Fire Pit, once the Fire Pit is completely cool,
wipe down with a damp cloth. Rinse with clean
water and use dish soap or baking soda. DO NOT
use any abrasive cleaners as they will damage
the finish. Once you’ve removed all residue, dry
with a soft cloth to prevent any rust from forming.
For more information on other things you
should know, refer to this user guide or visit
TIKIBrand.com.