Let’s get this fire started FIRE RING ACCESSORIES USER GUIDE
Table of contents Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Fire Poker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Stainless Tabletop. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assembly & Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fire Poker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Screen. . . . . . . . . . . . . . .
Screen safety cont. Screen safety • • • • • • • • The Fire Pit Screen and the Fire Pit Screen handle can reach extreme temperatures from the fire and will cause injury to an unprotected hand. The Fire Pit Screen and Fire Pit Screen handle should only be handled with the use of heat-resistant gloves or the Fire Pit Poker. DO NOT place the bottom piece of the Fire Pit Screen on Fire Pit when in use. The bottom piece of the Fire Pit Screen should be in place prior to starting a fire.
Fire Poker assembly & use Screen assembly & use Remove both pieces and screw together. Place both top (A) and bottom (B) pieces of the screen on the Fire Pit (C). Ensure that they are securely nested. Use the poker to adjust firewood for optimal air flow. After the pit has cooled, use the poker to scrape any remaining ash and debris through the grate and into the ash pan for easy clean-up. FI R E R I N G AC CE S SO R I E S 6 NOTE: Screen bottom piece should be in place prior to starting a fire.
Screen assembly & use Screen storage OP T I ON 1 OP T I ON 2 To add an additional Wood Pack or firewood, remove the top piece (A) of the screen with the included poker (see page 6 for assembly), and gently hang on the side of the bottom piece (B). ST EP 1 After a Wood Pack or firewood has been added, place the top piece back on with the poker. Ensure that it is securely nested.
Stainless Tabletop assembly & use When the Fire Pit is completely cooled, set the stainless tabletop (E) in place, making sure it is securely nested. NOTE: Store off to the side away from the fire when the Fire Pit is in use. When the Fire Pit is not in use, when completely cooled, put the stainless tabletop (E) on top of the pit and place the cover (D) (included with the Fire Pit purchase), over the top.
Stainless Tabletop frequently asked questions Can the stainless tabletop be used as a snuffer to put the fire out? No. How long should I wait for the Fire Pit to cool before using the stainless tabletop? If using the TIKI® Brand Wood Pack, this should take approximately 12 hours and is designed to completely consume leaving minimal ash. If you are using wood logs, times will vary depending on the amount of wood used and consumed.
Limited Warranty Visit TIKIBrand.com/our-guarantee or contact us at 1-888-473-1088 for more information. For information on patents go to TIKIBrand.com/patents Keep the fire going FOR WOOD PACKS AND OTHER PRODUCTS TO HELP YOU ENJOY YOUR FIRE, VISIT TIKIBRAND.COM WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause Cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.
T I K I B R A N D.
