App-Controlled Automatic Pet Water Fountain User manual
Step 1 2 Please rinse the filter under the water tap thoroughly(illustrated).
Step 3 Step 5 Step 4 Step 6
Care Instructions Step 1. App download and installation Step 2. App Registration 1. Please open “TuyaSmart” APP and click “Register” 2. Enter your email address. 3. Please input verification code sent to your email address 4.
Step 3. Pet Fountain Configuration After log in, click “add device” Step 4：Interface introduction (WI-FI) Device name,It can be modified. 【High】and【Low】, If it displays【Low】, 【High】it means there is sufficient water in water tank. Two status:normal and smart.( On smart mode cannot adjust the settings as settings are put on what is recommended, whereas on normal mode can adjust the settings to your preference.) Settings: set filter replace time, UV Running time etc.
① Set filter replace time. ② Set clean pump, water tank time. ③ After replace filter, click it, start timing. ④ After clean pump, water tank,click it, start timing. ⑤ Adjust water stream. ⑥ Adjust the indicator light. ⑦ Set UV running time. ⑧ Set change water time. ⑨ After change water, click it, start timing.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
