Installation Guide

2023.03.08
1. If framing Redi Niche into an existing finished wall (if new construction,
skip to Step 2), first locate and mark the center of adjacent framing studs
using a stud finder or by tapping the wall. Draw a level line between the
two wall studs.
a. Place the niche between the two marked studs with the flange walls
flush against the wall and trace the outline of the niche on the wall. Be
sure the top and bottom lines are level.
b. Cut out the wall board along the traced lines between the two studs
using a drywall saw and utility knife.
2. Measure the distance between vertical studs. (Please note that the
distance between the center lines of 2 adjacent studs generally is 16
inches and the niche is designed for that condition.)
If the distance is greater than 16 inches, attach vertical framing to one or
both of the vertical studs to accommodate the size of the niche.