Installation Guide

2023.03.08
3. Measure and cut top and bottom horizontal support framing to a length
which permits each to run between and to be fastened to both vertical
studs. Level and mechanically fasten the top and bottom horizontal
support brackets to both adjacent vertical studs so that the vertical
dimension between the horizontal support framing matches the vertical
dimension of the pre-drilled fastening holes on the Redi Niche flange.
4. Level and mechanically fasten the Redi Niche using one framing screw
in each pre-drilled.
5. Install your drywall or tile backer board around the Redi Niche so it’s in
accordance with industry standards.
6. Neatly apply 100% waterproofing silicone to cover each screw head and
to fill the gap between the niche flange and the adjacent shower board.