Instructions / Assembly

Copyright © 2014. Tile Redi Sales, LLC. All Rights Reserved 1 Rev. 20140314
Tile Redi® Installation & Tiling Guide
WonderFall Trench Tileable Grate Assembly
I. COMPONENTS: (See Fig. 1)
1. Tileable Drain Grate (x 1)
2. Rubber Bumpers (x 4)
3. Drain Strainer (x 1)
4. Trench Recess
5. WonderFall Trench™ Spacers (x 2)
II. HOW TO TILE THE TILEABLE GRATE AND THE
SHOWER PAN FLOOR EDGES AROUND THE
TRENCH RECESS: (See Fig. 2)
1. Insert the Tileable Drain Grate into the Trench
Recess.
2. Dry fit the tiles to the shower pan floor and
the Tileable Drain Grate.
3. Note Tiling Tip: Before setting tile on the
shower pan floor and the tileable grate you
must comply with the following: tile up to the
edges of the recessed trench (A and B) and the
edges of the grate (C and D) so that neither
the shower pan floor nor the Tileable Drain
Grate is visible, while at the same time
insuring (i) none of the Tileable Drain Grate
tiles extend beyond the edges of the
WonderFall Trench™ grate, (ii) none of the
shower pan floor tiles extend beyond the
shower pan floor into the space above the
recessed trench, (iii) proper drainage is
achieved by having none of the tiles encroach
into the drainage space between the tiled
shower pan floor and the Tileable Drain Grate,
and (iv) neither the floor tile or the
WonderFall Trench™ grate tile will prevent the
removal of the tiled grate from the Trench
Recess.
4. Now, remove the Tileable Drain Grate from
the Trench Recess and tile the shower pan
floor. Then insert the Tileable Drain Grate into
the Trench Recess and tile it, lining up any
grout lines on the tiled WonderFall Trench™
grate with the grout lines on the surrounding
shower pan floor tile.

Summary of content (6 pages)