USE AND CARE GUIDE Uptown 48 in. Single Vanity Combo ATTACH YOUR RECEIPT HERE Serial Number Purchase Date • Carefully read the instructions before starting the installation. • This vanity should be installed by an experienced plumber. • Drain pipe and drain trap are not supplied. Connect to an existing drain pipe. 1 All Rights Reserved.
PACKAGE CONTENTS B c PART DESCRIPTION A Vanity B Top (pre assembled to Vanity (A)) C Backsplash A QUANTITY 1 1 1 HARDWARE CONTENTS aa Touch-Up Pen Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install this product. WARNING • Keep small parts away from children. • Installing the item will require more than one person. CAUTION • DO NOT try to pry off top from vanity. Damage to top or vanity may occur.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 20-30 minutes (24 hours for adhesive to dry). Tools Required for Installation (not included): Silicone compound, Utility knife. INSTALLATION INSTRUCTIONS Step 1: Vanity Drawer Removal 1 1a. Open the preassembled drawer as far as possible. 1b.
INSTALLATION INSTRUCTIONS Step 2: Hinge Adjustable For Door Alignment. 2 2a. If the doors preassembled to vanity base (A) require adjustment, follow the below options as needed: To adjust door up or down, loosen screws (a), adjust door and retighten screws. To adjust door left and right, turn screw (b) in or out. To adjust door in and out, loosen screw (c), adjust door and retighten screw. A Step 3: Adjustable Level. 3 3a.
INSTALLATION INSTRUCTIONS Step 4: Backsplash Installation 4a. To mount the backslash (C) to the wall, 4 apply a thin bead of silicone compound (not included) to the unpolished back side C and bottom of the backsplash(C). P osition backsplash (C) as shown onto vanity top (A) and against the wall. Clean any ex cess silicone compound before allowing to dry.
CARE AND MAINTENANCE • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. • You can clean the vanity with a gentle, non-abrasive household cleaner. • Make sure to dry the wood immediately with a soft cloth or towel. • The stone top can be cleaned using standard marble cleaning agents available at your local supplier. • Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess colorant promptly with a soft cloth.