Installation Guide

Install the metal frame with shelf using long lag screw [A]. Tighten long lag screws [A]
with the screwdriver (not included). If you feel it is difficult to install the long lag screws
[A] to wall, you can simply use a 2mm(5/64 in.) drill bit to drill 2 pilot holes for the long
lag screw [A]. Tighten the long lag screw [A] only until the long lag screw [A] are pullled
firmly against the metal frame.
Position the metal frame with shelf at your desired height and line up the holes with
your stud center line. Level the shelf and mark the holes.
X
For wood stud mounting,
wall anchors [C] and [D]
are not necessary.
WARNING:
X
[Not Included] [Optional]
A
2 in.(50mm)
For Long Lag Screw
ø5/64 in.(ø2mm)
4