SHOWER SYSTEM 844-668-6420 sales@tiliteusa.com www.tiliteusa.
BACKER BOARD tīLite Backer Board offers builders and tile contractors a strong, lightweight, waterproof, and vapor-resistant tile base for wet areas. It is an XPS foam panel manufactured with a waterproof proprietary blend of synthetic polymer mortar and an alkali resistant fiber mesh. This gives it a highly rigid structure and exceptional bonding strength.
SHOWER PANS tīLite Shower Pans are pre-sloped and waterproofed to make tiled shower installations quick and easier than traditional mud based shower installations. tīLite Shower Pans can easily be cut down to size or extended using dry pack mortar. *drain covers sold separately.
SPECIAL ORDER SHOWER PANS SPECIAL ORDER PANS 36” x 48” 36” x 60” off-center 48” x 72” SPECIAL ORDER LINEAR PANS 48” x 48” single slope 36” x 60” four-sided slope 36” x 48” four-sided slope 36” x 48” single slope 48” x 48” four-sided slope 4 36” x 60” single slope
DRAIN OPTIONS MATTE BLACK BRUSHED BRONZE BRUSHED NICKEL CHROME HIGH GLOSS GOLD LINEAR DRAIN OPTIONS BRUSHED BRONZE MATTE BLACK HIGH GLOSS GOLD BRUSHED NICKEL 5 CHROME
SHOWER INSTALL USING BACKER BOARD AND URETHANE Washers & Screws Backer Board Pipe & Mixing Valve Seal Urethane Inside & Outside Corners Shower Pan Shower Curb 6
SHOWER INSTALL USING MEMBRANE SYSTEM Membrane Pipe & Mixing Valve Seal Seam Tape Inside & Outside Corners Shower Pan Shower Curb 7
MEMBRANE SYSTEM 5 2 4 2 1 2 3 1 2 1 tīLite Seam Tape 2 tīLite Membrane 3 tīLite External Corner 4 tīLite Internal Corner 5 tīLite Mixing/Pipe Valve Seal 8
MEMBRANE SYSTEM tīLite Membrane is a lightweight, poly- ethylene membrane for use under tile and stone surfaces in showers and wet area applications. It is also suitable for chemical resistant flooring. tīLite Seam Tape is made from the same lightweight, waterproof material as the tīLite Membrane and is for use over horizontal and vertical seams.
BACKER BOARD TECHNICAL DATA Properties Standards Values Compressive Strength perpendicular to surface ASTM D1621 50.50 psi Compressive Strength perpendicular to cross section ASTM D1621 386.0 psi Tensile Strength ASTM D1623 75.30 psi Shear Strength ASTM 273 53.30 psi ASTM C203 788 psi Nail Pull Resistance ASTM C473-10 Wet 313,8 PSI/Dry 668 psi Robinson Floor Test ASTM C627 Extra heavy duty & high impact use ANSI A 118.12, S 5.
WATERPROOFING MATERIALS TECHNICAL DATA Properties Evaluation ANSI Specification Does not support mold growth “Membrane shall not support mold growth” 52 lbs 16 lbs/2-in width Breaking Strength (4.3) Longitudinal 1674 PSI 170 PSI minimum Breaking Strength (4.3) Traverse 1139 PSI 170 PSI minimum - - Longitudinal (158 F) 0.0% - Longitudinal (-15 F) 0.0% - Traverse (158 F) 0.0% - Traverse (-15 F) 0.
844-668-6420 sales@tiliteusa.com www.tiliteusa.