Ver tical Sandblast Cabinet OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing this product! For future reference, please complete the owner’s record below: Model: STF-40FCB Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
SAVE THESE INSTRUCTIONS WORK AREA • Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating a sandblast cabinet. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. • Be alert of your surroundings. PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when using a sandblast cabinet.
ASSEMBLY Step 1 Step 1 – Cabinet Rear Plate Assembly Attach the Light Clamps (#37) on the inside of the Cabinet Rear Plate(#19) using the Bolts (#50), Flat washers (#59) and Hex Nuts (#54) OPERATION Step 2 Step 2– Cabinet Front Plate Assembly 1. Install the Gloves Mounting Ring (#33) and Glove Seal Ring (#30) on the Cabinet Front Plate (#17) using the Bolts (#48), Flat Washers (#59) and Hex Nuts (#54). 2.
Step 4 Step 4 – Cabinet Assembly 1. Attach the Front Cabinet Plate (#17) and the Rear Cabinet Plate (#19) to the top edges of the Roof (#16) overlapping the front and back flanges over the edges of the roof using Bolts (#47), Flat Washers (#58) and Nuts (#53) – use the middle three holes first. Leave all bolts loose until all bolts are in place. 2. Place the Left Cabinet Plate (#18) over the edges of the Front and Rear Cabinet Plates and the Roof.
Step 6 Step 6 – Funnel Assembly 1. Place the Funnel Left and Right Plates (#7) on the inside flanges of the Funnel Front and Rear Plate (#6) and secure in place with the Bolts (#47), Flat Washers (#58) and Nuts (#53). 2. Slide the Funnel Mouth (#5) over the bottom of the assembly and secure in place with the Bolts (#47), Flat Washers (#58) and Nuts (#53).
Step 9 Step 9 –Shelf and Frame Assembly 1. Install the Shelf (#2) with the Bolts (#43), Flat Washers (#57) and Nuts (#52). 2. Layer the Protective Film (#25), Glass (#27), Acrylic Glass (#26) and Frame (#28) over the opening on the Roof (#16) using Bolts (#49), Flat Washers (#59) and Nuts (#54). 3. Attach Large Cover (#36) using a Seal Ring (#23). 2 WARNING: Keep door closed when in use. WARNING: Only used media designed for this cabinet. WARNING: Do not exceed maximum capacity of 40 lbs of media.
DIAGRAM & PARTS LIST Page 8 of 10
Ref# Qty Ref# 1 Leg Description 4 32 Feet Description 4 2 Shelf 1 33 Gloves Mounting Ring 2 3 Handle 1 34 Leg Shim 3 4 Removal Cover 1 35 Metal Liner 1 5 Funnel Mouth 1 36 Large Cover 1 6 Funnel Plate (Front, Rear) 2 37 Light Clamp 2 7 Funnel Plate (Left, Right) 2 38 Nylon Threads 8 Section Hose 1 39 Light Lamp 1 9 Bottom Plate 1 40 Transformer 1 10 Screen Frame 1 41 Glove 2 11 Steel Screen 1 42 Abrasive Gun 1 12 Latch 1 43 Cross Pan
HOW IT WORKS Your shop air hose enters front opening of cabinet and is connected to the air inlet of power gun. Bottom handle of gun has 1/4" pipe threads which will fit most air hoses. Cabinet pickup tube leads to clear siphon hose which connects to gun head assembly. INSTRUCTIONS Pour glass beads or other abrasive into cabinet hopper through the side loading door. Place parts to be blasted in the cabinet and close the door. Do not over fill (1/2 full below work area screen is best).
