Product Manual

lcls u3HIo No 03nNIINo3

SNolllnUrSNI

Thumbscrew

Carbide

Guides

TIMElERLINE

PLEASE

READ

BEFORE USE

Chainsaws

are

dangerous.

Always

use caution

when

handling. Wear

gloves

prevent

injury. Be

sure

chainsaw

is turned

off, unplugged

if electric,

and

cooled

down before

sharpening.

'pauasool

aJP ssaql arns aIPIA

apls u0 sMaJrs

las

apr! r.lllM

MPs

lool

ereld

'no{

spJpru\o}

6ur}urod erEl;ns

}pU

uo i

psulpqr

alpld

8 ]CIS

PAGE 1
<- lcls u3HIo No 03nNIINo3 SNolllnUrSNI 'pauasool aJP ssaql arns aIPIA 'v apls u0 sMaJrs las apr! r.lllM MPs uo lool ereld 'no{ spJpru\o} 6ur}urod erEl;ns }pU uo i psulpqr alpld 8 ]CIS Thumbscrew Carbide Guides TIMElERLINE ," PLEASE READ BEFORE USE Chainsaws are dangerous. Always use caution when handling. Wear gloves to prevent injury. Be sure chainsaw is turned off, unplugged if electric, and cooled down before sharpening.
PAGE 2
Now while spinning carbide via the handle tighten rear thumbscrew until slight resistance is felt and small shavings are seen. *The first sharpening of a new chain will always be the most difficult. T carbide may grab and catch on rough edqes until the chain is seated. To prevent binding and minimize carbide wear, loosen side set screws allowing tool to move. As the carbide spins any vibration or chatter will out as the chain becomes seated. "Turn the handle clockwise - N EVER C0UNTERCLOCKWISE.