Installation Guide

Page 6
Square Shouldered Planks/Trimming a TimberTech Deck
Trimming a TimberTech Deck
TimberTech Fascia Boards:
• For Fascia and Riser Installation, see Fastening Guidelines
on page 4.
TwinFascia
®
• Cedar and Grey
• 12’ lengths – 9/16” thick by 12” wide.
Fascia
• Silver Maple, Brown Oak, Tigerwood, Mocha, Pecan,
Ashwood, Rustic Elm, Sandy Birch, Stone Ash, Amazon Mist,
Antigua Gold, Antique Palm, Caribbean Redwood
• 12’ lengths – 9/16” thick by 12” wide.
TimberTech Stair Risers
• Use as a riser for stairs.
• Can also be used as a fascia board for a 2x8 rim joist.
• 12’ lengths and 9/16” thick x 7-1/4” wide.
TwinRiser
®
• Cedar and Grey
Riser
• Silver Maple, Brown Oak, Tigerwood, Mocha, Pecan,
Ashwood, Rustic Elm, Sandy Birch, Stone Ash, Amazon Mist,
Antigua Gold, Antique Palm, Caribbean Redwood
Terrain, Tropical, Legacy, TwinFinish
®
, Reliaboard
®
, and Docksider
®
Terrain Stair Components
General Stair Installation
Stringer
Bracket
Bracket Nails
2x8 Stringer
1.5”x2.0” Simpson Strong Tie A232 Galvanized Connecting Angles
1-1/2” Simpson Strong-Tie N10D5HDG (0.150 in diameter, 0.315 in head diameter) galvanized nails
Terrain Collection Front View
16” O.C. Maximum
Bracket &
Nails
Stringer
2x6
Stair Installation
TimberTech does not recommend installing planks on steps without a riser board.
• Stairs should be constructed per local code requirements.
• Ensure the stringer step is at least the depth of two full planks plus a 1/8” to
3/16” gap between planks.
• For gapping requirements, see page 3.
• Ensure there is at least one stringer for support in the middle of the stair span.
Terrain Collection must be used as a veneer in a
stair tread application. Please see figure to the right.
TimberTech Stair Stringer Spacing Chart
Board
DockSider
TwinFinish
Tropical
Legacy
Reliaboard
Terrain
Maximum Spacing
21”
12”
10”
10"
9”
16”
When used as a veneer