Manualshelf

Installation Guide

ManualsBrandsTimberTech ManualsDeck Board SamplesAZEK Vintage 1 in. x 5.5 in. x 1 ft. Weathered Teak PVC Deck Board Sample
12345678910
Page 10
CONCEALoc
®
Hidden Fasteners Installation
3
2
• Fully insert the CONCEALoc fastener into grooved edge of plank. Screw hole
should be lined up with the center of support joist.
• Install provided screw at 45° angle through the fastener and into the joist while
applying pressure on the fastener.
• Install one fastener and screw at each joist.
• Make sure fastener is in full contact with edge of plank and the screw is holding the
fastener down tight to the deck board.
POSITION CONCEALoc FASTENERS
Incorrect
Incorrect
Correct
Correct
CONCEALoc
®
Hidden Fasteners Installation Instructions