User Guide

FR1504D TIMBREN INDUSTRIES INC.
www.timbren.com
PART NUMBER DESCRIPTION QTY LOCATION ASSEMBLY NOTES:
F41308-050 WASHER SPLIT LOCK M10 GR 8.8 Z 2 I1D
F11536-350 HCS M10 x 30 x 1.5 GR 8.8 Z 2 I1C APPLY 'LEFT' LABEL TO L/H BRACKET
F11538-350 HCS M10 x 40 x 1.5 GR 8.8 Z 2 I1C
F11543-350 HCS M10 x 65 x 1.5 GR 8.8 Z 2 I2D
A00545-65Q30 Hollow Rubber Spring 2 C9B
A25723-90AH00 RUBBER SPACER 4"od x 1" thk w/ AH Bushing 2
K10482LH-003 FR1504D / FRTT1502D LH WELDMENT PTD. 1 D14B
K10482RH-003 FR1504D/FRTT1502D RH WELDMENT PTD. 1 D14A
B90201-CR LARGE REAR BOX - 10.5 X 8.5 X 6 1 A--D
B10000 8" X 12" BUBBLE FOR KITS 1
B00029-010 BARCODE LABEL FOR KIT 1
Issued: 4/10/2014
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email [e-mail]