Owners manual

GMRW55 TIMBREN INDUSTRIES INC.
www.timbren.com
PART NUMBER DESCRIPTION QTY LOCATION ASSEMBLY NOTES:
F31005-250 NYLOCK LOCKNUT 1/2 UNC GR 5 Z 4 G1B
F40052-020 WASHER FLAT USS 1/2 x 1-3/8 GR 2 Z 8 G1D PACK F11397-250 BOLTS
F11064-250 HCS 3/8 x 1-3/4 UNC GR 5 Z 4 G3D LOOSE IN CARTON.
F11397-250 HCS 1/2 x 7-1/2 UNC GR 5 Z 4 G3A
A00200-65Q30 Hollow Rubber Spring 2 C17B
K10487-003 GMRW55 WELDMENT PAINTED 2 D12C
K10440-003 GMRW55 WELDMENT PAINTED 2 D12C
B90223 10-3/4 x 9-1/2 x 7 DW Carton 1 A1A
B10100 NEWSPRINT 18" ROLL 1
B00029-010 BARCODE LABEL FOR KIT 1
Issued: 7/15/2009
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email [e-mail]