User Manual

1. T/C out
SMPTE Timecode OUT, BNC socket (2V p/p)
2. T/C in
SMPTE Timecode IN, BNC socket (0.5V to 5V p/p)
3. TV Sync out
TV Sync OUT, BNC socket (1V p/p)
4. Power input
Hirose HR10a power socket (9-18V DC, Pin 1 GND, PIN 4 POS)
5. Power input and TC in and out socket
Standard Lemo5 socket with power IN pin (9-18V DC) and T/C in/out
(Pin 1 GND, Pin 2 T/C IN, Pin 4 POS , Pin 5 T/C OUT)
Attach
Securely t your Timecode Buddy: wi master to any
camera from the side panel.
1. Coldshoe adaptor
You have three options:
• Reverse to stow away in the product case
• Attach directly to a camera.
• Fit snugly into a Timecode Buddy: bracket holder.
Customise
On-screen menus allow you to easily customise the settings of the
Timecode Buddy: wi master to meet the exact needs of your shoot.
The default display shows (on time-out also):
T/C + FPS + MODE + RF CHANNEL + SIGNAL STRENGTH
timecode sync pwr pwr/tc
out in out 9-18v dc
1 2 3 4 5
Assembled in the UK,
Timecode Systems Ltd,
www.timecodebuddy.com
1
Timecode Buddy Manual page : 4