User's Manual

More on menus
Each menu allows further customisation of your Timecode Buddy:
mini trx.
Timecode mode. Choose from three settings:
• IntGen. Activates the highly accurate internal generator. From here
you can set your own T/C, user bits and FPS settings. You can also
jam from an external RF or BNC T/C source.
• ExtRF(cont). Constantly jam syncs the internal generator from the
received T/C via Buddy DataLink. If Buddy loses signal of received
T/C, the T/C output continues using the internal generator.
• ExtBNC. Constantly jam syncs the internal generator from the
received T/C via the BNC I/P socket . If Buddy loses signal of
received T/C, the T/C output freezes immediately.
Internal generator. Choose from:
• Settimecode. Turn to set ashing digits, press to enter, repeat for
each pair.
• Setuserbits.Turn to set ashing digits, press to enter, repeat for
each pair.
•SetFPS. Set to 23.98, 24, 25, 29.976, 29.976DF, 30 or 30DF.
RF settings. From here select:
• Channelno.1 to 14
• RFTXOn/Off.When in Internal or BNC modes the Timecode
Buddy: mini trx can transmit SMPTE timecode data via Buddy
DataLink to any other Timecode Buddy: wi master or mini: trx
listening on the same channel.
• RxUbitsOn/Off. When Off the User Bits are derived from the unit
itself, not the incoming LTC
Timecode Buddy: mini trx manual page : 7