Owner manual

47
3.3 Connection
The presence detector must be ush
mounted into a concealed housing. The
enclosed set of seals is to be used for
IP54 installation.
A suitable frame for surface mounting is
also available. If the surface-mounting
seal set is used for surface mounting, the
detector will also comply with Protection
Class IP54.
3.4 Protection Class IP54
To ensure compliance with Protection
Class IP54 when ush mounted, the pre-
sence detector must be installed using the
enclosed IP54 seal set for ush mounting
as shown in the gure alongside.
If the seal set is not used, only Protection
Class IP40 will be achieved.
PresenceLight
N
L
NL
A
IP54 mounting with gas-
ket set IP54 only!

GB