Model: NTM01 Analogue Timer Module Installation & Operating Instructions 24 Hour Mechanical Time Switch
NTM01 – Analogue Timer Module ON segment Programme ring Time indicator 1 Time control segments: 1 segment = 15 minutes, push segment down for on, pull up for off. Control switch: 1 = permanently on, Timer symbol = timed control, 0 = permanently off. 1. General: This time switch is a compact and easy to use segment timer module. It can control outputs of up to 16A which makes it suitable for domestic immersion heaters.
2. Features: Permanent On/Off facility. This enables the heater under control to be turned off when alternative methods of heating are available, or during a holiday period. It also enables the heater to be permanently turned on. Shortest switching time of 15 minutes increasing in 15 minute steps. Up to 48 programmes per day. 3. Installation: 2 We recommend that this unit be fitted by a qualified electrician. Install in accordance to wiring and current building regulations.
. Programming the time switch: a) Decide what times you would like the time switch to switch ON and Off. b) Push the required segments down for the duration of an on period, and pull them up for the duration of an off period. The minimum switching interval is 15 minutes, and this can be increased in 15 minute steps. c) Set the correct time, by rotating the dial clockwise until the correct time is indicated by the triangular pointer.
6. Specifications: Operating temperature: 0°C to 40°C 230V 50Hz Switch rating: 16A resistive, 8A inductive, 1 HP, 750W incandescent, 750W halogen, 750W fluorescent, 100W compact fluorescent. Switch type: 22A micro switch Voltage free contact: Yes Contact type: Single pole change over Time period: 24 hours Note: Product not suitable for discharge lighting. 54 CTS 7. Mounting Details: 54 CTS 54 CTS 62.5 Dia. 54 CTS 62.5 Dia. 3.3 Dia. 60 Sq. 3.3 Dia. 35.5 21 35.5 60 Sq.
3 Year Guarantee In the unlikely event of this product becoming faulty due to defective material or manufacture within 3 years of the date of purchase, please return it to your supplier in the first year with proof of purchase and it will be replaced free of charge. for years 2 and 3 or any difficulty in the first year telephone the helpline on 020 8450 0515. Note: a proof of purchase is required in all cases.
