TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Screen display and keys Programmed switch times 0 6 12 18 Seite 4 Operating principle 1. Read text line 24 Flashing text/symbol represents question Date display Time display Channel status C1 + C2: ON OFF Days of the week from 1–7 2.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Seite 6 Connection/installation WARNING Warning, danger of death through electric shock! Must be installed by professional electrician! 45° cable Disconnect power source. Cover or shield any adjacent live compoSpring screwless nents. terminal Ensure device cannot be switched on! Check power supply is disconnected! Spring screw Earth and bypass! Connect cable Strip cable by 8 mm (max. 9).
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 Initial start-up (see fig.) 10:58 Uhr Seite 7 GB GERMAN YEAR MONTH Set date, time and summer/winter time rule DAY HOUR MINUTE Press desired button and follow on-screen instructions.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Seite 8 Reprogram switching time (see fig.) ok PROGRAM NEW SWITCH Press MENU. Confirm with OK or select desired setting Reconfirm with OK . CHANNEL C1 . FREE 84 ON C1 You have 84 memory locations available.
31.10.2008 Change/delete switching time (applies also for pulse and cycle) 10:58 Uhr GB PROGRAM NEW (see fig.) CHECK Press MENU. Confirm with OK or select desired setting Reconfirm with OK . You can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time. Seite 9 MODIFY . DELETE ok SWITCH CHANNEL C1 MONDAY MODIFY HOUR MODIFY MINUTE MODIFY BLOCK TERMINA 611_622 top2_309 259 04_GB.
TERMINA 611_622 top2_309 259 04_GB.qxd Pulse programming (see fig.) (for pause signals, air-conditioning, flushing etc.) 31.10.2008 10:58 Uhr Seite 10 PROGRAM NEW ok SWITCH ok PULSE CHANNEL C1 MEM FREE 84 CYCLE ON C1 On Press MENU. Confirm with OK or select desired setting . HOUR MINUTE SECONDS PULSE LENGTHTION MINUTE RESET SECONDS MONDAY COPY ADD TUESDAY SAVE 10 You can choose between KEEP PROGRAM and DELETE PROGRAM . Press the 4 buttons simultaneously.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Seite 11 Cycle programming (see fig.) (with cyclical time functions, e. g. water treatment etc.) GB PROGRAM NEW ok SWITCH PULSE CYCLE ok CHANNEL C1 MEM FREE 84 Press MENU. Confirm with OK or select the desired setting with .
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Seite 12 Manual and permanent switching PIN code Manual and permanent switching can be selected by using menu option MANUAL or (in the automatic display) via a combination of buttons (see fig.) . The PIN code is set in the menu under OPTIONS (see fig.). If you have forgotten the PIN call the Theben Hotline. OPTIONS ok Channel C1 Channel C2 Activate manual switching Quickly press both buttons simultaneously.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 10:58 Uhr Seite 13 External input Memory card OBELISK top2 The EXTERNAL INPUT can be set using OPTIONS menu entry (see fig.). Use memory card Use switch without glow lamp path. OPTIONS OPERATING HOUR ok EXTERNAL INPUT CHANNEL C1 BUTTON LCD ILLUMINATION SWITCH LANGUAGE PIN INACTIVE FACTORY SETTINGS ok MANUAL TIMER GB Insert memory card in the timer. Request savedswitch timings, read to/from the timer or start Obelisk program.
TERMINA 611_622 top2_309 259 04_GB.qxd 31.10.2008 Technical data • • • • • • • • • • • • • • 14 Nominal voltage: 230–240 V~, +10 %/-15 % Frequency: 50-60 Hz Power consumption: max. 6 VA Switching output: phase-independent (zero-crossover switching), TR 611 top2: suitable for switching SELV (Safe Extra-Low Voltage) Contact: two way switch Contact material: AgSnO2 Switching capacity max.: 16 A, 250 V~, cos ϕ = 1; 10 A, 250 V~, cos ϕ = 0.6 Switching capacity min.
