TD Vinyl Flooring Installation Guide

10/3/2013
3
III.INSTALLATION
1. Installation method of floor panels, cont.

Fig5.
General.Distancesbetweenshortends.
Minimumdistancebetweenshortendsofplanksin
parallelrowsshallnotbelessthanabouttwotimes
thewidthoftheplank.
Fig7.
Secondplanksecondrow.
Placetheshortendofthefloorboardatan
angleagainstthepreviousinstalled
floorboardandfolddownalltheway.

Fig6.
Placethefloorboardanangleagainstthefloorboard
inthepreviousrow,pressforwardand
folddownatthesametime.Leavethepanelina
somewhatupangledpositionwherethepanelsstart
toloc.Tomakethisfurthereasier,awedgewiththe
suitableanglecanbe
placedundertheplanknearthe
shortsidejointassupport.

Fig8.
Pushtoslidetheplankagainsttherowinfrontsoit
alignswiththefirstplank.Putitdownlikewiththe
firstplankwhenthefloorboardsarepositioned
tightlytogether.Thefirst/previousplankcannowbe
foldedcompletelydowntohorizontalpositionandif
awedgeis
useditcanbemovedtothenextshort
endjoint.