TD Vinyl Flooring Installation Guide

10/3/2013
4
III.INSTALLATION
1. Installation method of floor panels, cont.
2. Horizontal installation (Optional)
Fig 11. Fig 12.

Cutoffthelockingelementwithachisel,applyapplicableglueontheadjustedstripandpushtheplankshorizontally
together.Ifnecessaryplacesomespacersbetweenlastboardandthewallduring
thehardeningtimeoftheglue.Themethodcanalsobeappliedtotheshortends.
Fig9.
After2‐3rows.
Adjustthedistancetothefrontwallbyplacing
distances¼inch.Keepthedistancesinposition
duringtheentiretimeofinstallationandremove
oncetheinstallationiscompleted.
Fig10.
Ifthewallisuneven,thefloorboardsmustbe
adaptedtoitscontours.Markthefloorboards
withthecontourofthewall.Donotforgetto
leavea¼”spacetothewall.

Thisprocedureshallbeusedalsoforthefirstrow
ifnecessary.