TD Vinyl Flooring Installation Guide

10/3/2013
2

III.INSTALLATION
1. Installation method of floor panels
Fig1.
Firstplank,firstrow.
Placeadistance¼”thicknesstotheleft
andpositiontheplankagainstthewall.

Later,after3rows,youcaneasilypositiontheflooring
againstthefrontwallwithdistances¼inch.

Priortoinstallation,measurethewidthoftheroomto
checkif
thefirstrowshouldpreferablybecutlengthwise
togetmoreequalwidthofthefirstandlastrowsplanks.
Seealsofig12.
Fig2.
Secondplank,firstrow
Presstheshortendofthenextfloorboardatanangleto
thefirstone,andthenlaydown.

Completethefirstrowinthesameway.
Fig3.
Attheendofthefirstrow,putadistance¼”,tothewall
andmeasurethelengthofthelastplanktofit.

Cutthelastpaneltocorrectlength,recommendedmin
lengthistwotimesthewidthoftheplank
Fig4.
Secondrow.Positiontheremainingpartofthe
firstrow’slastplankasfirstplankofsecond
row.Keepagaintwotimesthewidthasmin
length.
Putadistanceagainstthewall.