SDS

SAFETY DATA SHEET
A07994 TM LAVENDER LMN TWIST 5N3 12PK NS
Version 0.0 Revision Date 03/15/2017 Print Date 03/15/2017
4 / 12
emergency procedures Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions : Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
Advice on safe handling : Do not breathe vapours/dust.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage : BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid : Keep away from oxidizing agents and strongly acid or alkaline
materials.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
acetone 67-64-1 TWA 250 ppm ACGIH
STEL 500 ppm ACGIH
TWA 250 ppm
590 mg/m3
NIOSH REL
TWA 1,000 ppm
2,400 mg/m3
OSHA Z-1