Installation Instructions

TimePilot Vetro Quick Start Guide
1. Unpack the box.
Here’s what’s inside:
2. Mount your clock. 3. Set the me and date.
When the clock powers up, you’ll see a message on the screen
asking you to set the date and me. Here’s how:
1. Use the clock’s keypad to enter the factory-set
administrave password: “123456” (You’ll change this
password to something unique to your organizaon when
you run the TimePilot soware’s Vetro Setup Wizard in the
next step.)
2. Follow the on-screen instrucons and use the keypad to set
the date and me.
4. Install and set up the soware.
Place the CD in your computer’s CD drive. When
the opening screen appears, click “Install TimePilot
Soware,” then “TimePilot Installaon Wizard.”
The next step depends upon the version of the
TimePilot soware you are installing:
• Professional Edion and Enterprise Edion users
should click the “Install TimePilot Soware”
buon. This will install TimePilot Central, the core
of the TimePilot soware, and Clock Manager, which links your
meclock(s) to TimePilot Central.
• Users of other versions of the TimePilot soware should install
TimePilot Central and then connue on in the Installaon Wizard
to install Vetro Data Manager.
When installaon is complete, double-click the TimePilot Central icon
on your desktop to start the Setup Wizard, which will help you prepare
your system for use. You’ll need your soware’s serial number; it’s on
a scker aached to the printed warranty informaon that came with
your product.
5. Set up iBuons.
(Not using iBuons? Skip this step.)
1. At the clock, enter Administrave
Mode by pressing “99” followed
by “OK” on the keypad. When
prompted, enter the administrator
password you created in Step 4.
2. Select “Assign iBuons” by entering
the appropriate menu number on
the keypad.
3. Using the up and down arrow keys,
scroll to the name of the employee
to receive the iBuon and tap the
iBuon to the “In” or “Out” probe.
4. Repeat the previous acon for the
next employee, or press “ESC” to
return to the main menu and ESC
once again to exit.
6. How to clock in.
To clock in or out with an iBuon,
touch it to the “In” or “Out” probe.
To clock in with your ID code,
touch the screen to illuminate the
buons, enter the code and press “In” or “Out.”
The clock will beep twice and display your
name.
Having problems? Contact TimePilot tech support at 630-879-6400 or [e-mail]
© TimePilot Corporaon. All rights reserved.
Vetro meclock
10 iBuons
USB
Drive
Power Supply Soware CD
Mounng
template
Using the supplied screws and
template, mount your clock to a wall.
Plug the power supply into a surge
protector and into the boom of the
clock.
If you’re connecng the clock to your
Local Area Network, plug the network
cable into the jack at the boom of the
clock.
7. Next steps.
This guide gives you the basics about your new
system. If you’d like to learn more, visit the Help
les in TimePilot Central. They contain ps,
suggesons and in-depth explanaons to help
you get the most out of your system, as well as
a glossary of the terms used in the soware.