Cycle Trainer ™ 2.0 GPS NA/EU W280 242-095004 W280_NA_EU_BOOK.
Table of Contents Get Started Using Your Cycle Trainer™................................................................... 4 Charge the Cycle Trainer........................................................................................ 5 Basic Operation...................................................................................................... 6 Button Functions.................................................................................................... 7 Icon Descriptions................
Get Started Using Your Cycle Trainer™ Charge the Cycle Trainer Timex Cycle Trainer™ 2.0 bike computer adds a dashboard to your handlebars. Five screens of real-time cycling data provided by GPS, the included heart rate sensor and optional ANT+™ power sensors let you track your performance and finely tune your ride. This guide contains all you need to know to get started using your Cycle Trainer™ computer including the basic functions of each button and how to configure required settings.
Basic Operation back/ /Enter 6 W280_NA_EU_BOOK.indb 6-7 Button Functions p /Start/Stop Lap/reset/q BACK/ Hold for 2 seconds to turn the Cycle Trainer™ computer on or off. Press to turn the night-light on or off. In menus, press to go back to the previous page. /ENTER Press to cycle through screens in Speedometer mode. Hold to enter the main /ENTER to select the highlighted choice. menus. In menus, press p/START/STOP Press to highlight the previous item in a list.
Icon Descriptions Install the Cycle Trainer™ Computer These icons can appear on the Time and menu screens. Use the two zip ties to attach the mounting bracket to your bike, and then slide the device into the mounting bracket. The four holes in the bracket and repositionable base allow your computer to be mounted to your handlebars in any orientation. GPS status Solid: GPS has a satellite fix. More bars indicate a stronger signal. Blinking: GPS is seeking a satellite fix.
Turn the Power On and Off Hold for about 2 seconds to turn the device on or off. Set Display Units Note: all of the following settings can also be done on your computer with the Timex® Device Agent. See “Installing the Device Agent” in the online User Manual. Choose the system of measurement in which your user, ride, and navigation data will display. You can display distance and weight units in ENGLISH, METRIC, or NAUTICAL measurements.
Connect the Heart Rate Sensor to the Cycle Trainer™ 1. Make sure you are at least 30 feet away from other heart rate sensors. 2. Wet the heart rate sensor pads, and fasten the sensor firmly to your chest, just below your sternum. 3. Press and hold ENTER to bring up the Main Menu. Highlight CONFIGURATION, then press ENTER. 4. Highlight ACCESSORIES, then press ENTER. 5. Highlight SENSORS, then press ENTER. 6. Highlight HEART RATE, then press ENTER. 7. Highlight SCAN, then press ENTER.
In order to obtain a GPS fix: 1. Go outdoors. 2. Move away from buildings and tall trees. 3. Make sure the face of the Cycle Trainer™ computer is pointed at the sky. 4. Stand still until the satellite fix is obtained. Take a Ride Start the timer in Speedometer mode to begin timing a ride. While the timer is running, the Cycle Trainer™ computer records speed, distance, route, heart rate, and other data. 1. Press START to begin timing. 2.
Saved rides are listed by date and time displays. The time, distance, average speed, average pace, calories burned, and average heart rate for the ride are displayed at the bottom of the screen. 4. To view ride details, press p or q to choose a ride, then press ENTER. The ride details screen is displayed. You can view all of the data saved from Speedometer mode.
Please note that Timex may, at its option, repair your Timex® product by installing new or thoroughly reconditioned and inspected components or replace it with an identical or similar model. IMPORTANT: PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO YOUR PRODUCT: 1. after the warranty period expires; 2. if the product was not originally purchased from an authorized Timex retailer; 3. from repair services not performed by Timex; 4. from accidents, tampering or abuse; and 5.
Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the U.K., call 44 208 687 9620. For Portugal, call 351 212 946 017. For France, call 33 3 81 63 42 00. Germany/Austria: +43 662 88921 30. For the Middle East and Africa, call 971-4-310850. For other areas, please contact your local Timex retailer or Timex distributor for warranty information. In Canada, the U.S.
Declaration of Conformity Manufacturers Name: Timex Group USA, Inc. Manufacturers Address: 555 Christian Road Middlebury, CT. 06762 United States of America Declares that the product: Product Name: Timex Cycle Trainer 2.0 GPS Computer with Heart Rate Model Number: M242, M503 Conforms to the following specifications: R&TTE: 1999/05/EC Standards: EN 300 440-1 V1. 6.1 (2010-08) - M242 EN 300 440-2 V1. 4.1 (2010-08) - M242 EN 301 489-1 V1. 8.1 (2008-04) - M242 EN 301 489-3 V1. 4.
LVD: 2006/95/EC Standards: EN 60950-1: 2006 + A11: 2009 + A1: 2010 - M242 EN 60950-1/A11: 2009 – M503 Supplemental Information: The product herewith carries the CE marking accordingly. ©2011 Timex Group USA, Inc. TIMEX and CYCLE TRAINER are trademarks of Timex Group B.V. and its subsidiaries. ANT+ and the ANT+ Logo are trademarks of Dynastream Innovations, Inc. 24 W280_NA_EU_BOOK.
