User Guide

NIGHT-MODE
®
FEATURE
TO USE NIGHT-MODE
®
FEATURE:
1. PUSH and HOLD Crown to “D” position for 4 sec-
onds to activate NIGHT-MODE
®
feature.
PRESSING any pusher will
cause the INDIGLO
®
night-light to stay on for 3
seconds.
2. NIGHT-MODE
®
feature will last for 8 hours.
3. Or PUSH and HOLD Crown to “D” position for 4
seconds to deactivate Night-Mode
®
feature.
IF STOPWATCH HANDS DO NOT RETURN TO
“0 POSITION” WHEN THE STOPWATCH IS
RESET:
1) PULL crown out to “B” position
2) PRESS pushers “A” or “B” repeatedly to move
hands to “0” position
3) PUSH in crown to “A” position
35
ENGLISH
STANDARD CHRONOGRAPH
MEASUREMENT:
1. PRESS pusher “A” to start timing.
2. PRESS pusher “A” to stop timing.
3. PRESS pusher “B” to reset.
SPLIT TIME MEASUREMENT:
1. PRESS pusher “A” to start timing.
2. PRESS pusher “B” to split.
3. PRESS pusher “B” to resume timing.
4. PRESS pusher “A” to stop timing.
5. PRESS pusher “B” to reset.
INDIGLO
®
NIGHT-LIGHT
With the crown in the “A” position, PUSH crown to
the “D” position. Entire dial will be illuminated.
Electroluminescent
technology used in INDIGLO
®
night-light
illuminates entire watch face at night and in low light
conditions.
34
ENGLISH
W223_Analog2_NA_EN.qxd 6/5/09 9:19 AM Page 34