Model T309 Alarm Clock Radio with Digital Tuning and Nature Sounds For additional information, online registration, and exclusive special offers please visit our website: www.sdidirect.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK OF UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Installation and Maintenance Installation 1. Remove the unit and all packing materials from the carton. You should save packing materials in case unit needs to be returned for service. If you do not wish to save the materials, please dispose of them properly. 2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields. 3.
Controls and Indicators Volume Thumbwheel Nature Sounds Button SOUNDS Off/Reset Button RADIO OFF/RESET ON/SLEEP SNOOZE / DIMMER Radio On/Sleep Button Snooze/Dimmer Bar Time Set Button Date Set / 7-5-2 Button Sleep Volume Button BUZZER EVERYDAY TIME SOUNDS SAT-SUN RADIO DATE/7-5-2 SOUNDS SLEEP VOL DATE YEAR 1 >> 2 BUZZER AM FM1 FM2 SLEEP BAND Radio Band Button RADIO MON-FRI 3 ENTER 4 5 Radio Alarm Button Sounds Alarm Button Buzzer Alarm Button 6 >> Forward
LCD Display With Indicators Radio Alarm Indicator Buzzer Alarm Indicator 7-5-2 Alarm Settings BUZZER EVERYDAY RADIO MON-FRI Nature Sounds Alarm Indicator SOUNDS SAT-SUN 7-5-2 Alarm Settings PM Indicator Clock Sleep Timer DATE YEAR SLEEP AM FM1 FM2 Radio Band Indicator Battery Low Indicator Radio Frequency / Calendar Display / Nature Sounds Indicator Sleep Volume Indicator 6
Setting the Clock and Calendar Setting the Clock 1. Press and hold the Time Set Button until the display begins flashing. 2. Press the Reverse or Forward Button to set the time. Holding a button for a few seconds will advance or reverse the time rapidly. Set the correct AM/PM time, shown by the PM Indicator on the display. 3. After setting the time, press the Enter Button or wait about ten seconds for the unit to beep twice and the display to return to the normal mode. Setting the Calendar 1.
Listening to the Radio Operating the Radio 1. Press the Radio On/Sleep Button once to turn on the radio. The display will show the word “On” before returning to the clock display. The bottom of the display will show the digital radio frequency. Note: If the Radio On/Sleep Button is pressed more than once, the unit will enter the sleep mode, with the radio operating on a timer. See Sleeping to Radio with Timer for more information about this feature. 2. Press the Radio Band Button to select a radio band.
Sleeping to Radio or Nature Sounds with Timer Sleeping to the Radio with Timer Note: For more information about playing the radio, see the Listening to the Radio section of this manual. 1 . Press the Radio On/Sleep Button twice to enter the sleep mode. 2 . Continue pressing the Radio On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time. When the display shows the desired sleep time, stop pressing the button.
Operating the Alarms This clock radio features an alarm system with three independently operated alarms. Any combination of the three alarms can be set, including the AM/FM radio alarm, nature sound alarm, and the buzzer alarm. In addition, each alarm utilizes a 7-5-2 Advance Alarm setting that can be set in advance for a full week, Monday through Friday, or the weekend. Setting the AM/FM Radio Alarm 1. Press and hold the Radio Alarm Button until the settings and radio frequency appear on the display. 2.
Operating the Alarms (Continued) Setting the Buzzer Alarm 1. Press and hold the Buzzer Alarm Button until the alarm setting appears on the display. 2. Press the Reverse or Forward Button to set the alarm time. 3. See Step #4 in the Setting the AM/FM Radio Alarm section for instructions on setting the Buzzer Alarm’s 7-5-2 Advance Alarm. 4. After you have programmed the buzzer alarm, press the Enter Button or wait ten seconds to return to the clock display.
Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
