Model T439 MP3/CD Line-In dual alarm clock radio For additional information, online registration, and exclusive special offers visit our website: www.timexaudio.com For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire hazards. Please read all the safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference. Take special note, adhere to all warning, and always follow the instructions on the unit and in the instruction and service manuals. 1.
Installation and Maintenance Installation 1. Remove the unit and all packing materials from the carton. You should save packing materials in case unit needs to be returned for service. If you do not wish to save the materials, please dispose of them properly. 2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields. 3.
Controls and Buttons Off/Alarm Reset Button 6 7 Snooze/Dimmer Bar 8 Power On/Sleep Button 9 Sleep Volume Button Color Select Button 5 Radio Alarm Button 4 J Buzzer Alarm Button Time Set Button 3 K Alarm Set Button Date Set Button 2 L 7-5-2 (Year) Button Reverse << (Date) Button 1 M Forward >> (Month) Button CD/MP3/AUX Radio Tuning Thumbwheel P N Radio/Aux Band Switch O Volume Thumbwheel 5 CD/MP3/AUX Jack
LCD Display With Indicators Radio Alarm Indicator Radio Power Indicator Buzzer Alarm Indicator Battery Low Indicator Daylight Savings Time Indicator POWER PM PM Indicator Sleep Volume Indicator Calendar/ Sleep Timer RADIO BUZZER DST SLEEP M SUN Clock D MON TUE WED THU FRI SAT Calendar Day/ 7-5-2 Alarm Settings 6
Setting the Clock and Calendar Setting the clock 1. Press and hold the 3 Time Set Button until the time display begins flashing. 2. Press the 1 << or M >> Button to adjust to correct time. Holding a button for a few seconds will advance or reverse the time rapidly. 3. Remember to set the correct AM or PM. The PM Indicator is located on the left side of the time digits. 4. Press the 3 Time Set Button again or wait about ten seconds for the unit to beep twice and the display to return to normal display mode.
Listening and Sleeping to the Radio Listening to the Radio 1. Press the 8 Radio On/Sleep Button once to turn the radio on. The Radio Power Indicator will appear at the top of the display. Note: If the 8 Radio On/Sleep Button is pressed more than once, the unit will enter the sleep mode. See the Sleeping to the Radio with Timer section for more information about this feature. 2. Slide the N Radio Band Switch to AM or FM. 3. Rotate the P Radio Tuning Thumbwheel to select a radio station. 4.
Operating the Alarms Setting the Radio Alarm 1. Press the K Alarm Set Button once to set the radio alarm. The display will flash and show the radio alarm setting. 2. Press the 1 << or M >> Button to set the radio alarm time. Hold either button for a few seconds so as to advance or reverse the alarm time rapidly. Set the correct AM/PM time, shown by the PM indicator. 3. While the display is still flashing, press the L 7-5-2 Button repeatedly until your desired alarm days are shown on the bottom of display.
Limited 90-Day Warranty Information Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $3.