W239 NA 778-095000
English page 1 Français page 13 Español página 27 Português página 41
1 Congratulations on purchasing your TIMEX® watch. Please read these instructions carefully to understand how to operate your Timex timepiece. Your watch may not have all of the features described in this booklet. For more information, and to register your product please visit: www.timex.
2 TABLE OF CONTENTS 3 How to Start Your Watch 3 Water and Shock Resistance 5 To Set Time/Day/Date 6 How to Adjust Bracelet 9 Warranty 3 HOW TO START YOUR WATCH To start your watch remove the plastic guard from under the crown, then press the crown in against the case. The second hand will begin advancing in one-second intervals. WATER AND SHOCK RESISTANCE If your watch is water-resistant, meter marking (WR_M) is indicated. Water-Resistance Depth p.s.i.a.
4 WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR WATCH IS INDICATED AS 200 METER WATER-RESISTANT. 1. Watch is water-resistant only as long as crystal, crown and case remain intact. 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock-resistance will be indicated on the watch face or caseback. Watches are designed to pass ISO test for shock-resistance.
TO SET QUICK DATE® FEATURE: 3-Position Crown: 1) Pull crown to “Middle” position and turn CLOCKWISE or COUNTERCLOCKWISE until correct date appears. 2-Position Crown: 1) Pull crown to “OUT” position and turn CLOCKWISE until date changes. Repeat until correct date appears. Adjust date when month has less than 31 days. Push crown in when finished. HOW TO ADJUST BRACELET 7 4. Press locking plate down until it snaps closed. Clasp can be damaged if excessive force is used. FOLDOVER CLASP BRACELET 1.
8 BRACELET LINK REMOVAL Removing Links: 1. Place bracelet upright and insert pointed tool in opening of link. 2. Push pin forcefully in direction of arrow until link is detached (pins are designed to be difficult to remove). 3. Repeat until desired number of links are removed. Re-assembly: 1. Rejoin bracelet parts. 2. Push pin back into link in opposite direction of arrow. 3. Press pin down securely into bracelet until it is flush. 9 Timex strongly recommends that a retailer or jeweler replace battery.
10 THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. TIMEX IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limitations may not apply to you.
