Users Manual Part 1

<160°

In AUTO/MAX and Dry mode, the appliance

will stop working when put uprightly and start

running again when you recline.

Grip the back carry handle to lift or move

appliance. Empty CWT and DWT after each

use.

Note:

• The carpet cleaner differs from the traditional vacuum cleaner.

• In all modes, it blows hot air, whose temperature is 70-80°C.

* Appropriate temperature is conducive to dissolve the dirt and helps surfactant in the solution to decompose the dirt.

• In AUTO/MAX mode, it sprays water when moving forward and stops spraying when moving backward.

• Take a spot test on a small and marginal area of the carpet for colorfastness. Gently rub surface

with a damp white cloth. Then wait ten minutes and check for color removal or bleed with a white

paper towel.

• Do not grip DWT handle to lift or move the appliance.

Stop Working