Users Manual Part 1

Runtime

• The runtime for the Floor Washer is about 15~20 minutes.

• The runtime for the Hand Vac is about 25~50 minutes.

• Estimated runtime data was obtained by a Tineco Laboratory.

Charging Time

• A full charge takes approximately 3~4 hours.

• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between

39.2°F (4°C) to 104°F (40°C).

Indicator

When in Use

Battery level ＞ 10%: battery indicator will be illuminated.

Battery level ≤ 10%: battery indicator will be blinking.

Off: no power detected or possible battery malfunction.

Indicator blinking: dirt sensor malfunction or blocked.

Indicator blinking: CWT is empty.

Indicator blinking: DWT is full or channel has a blockage.

Indicator blinking: brush roller is not installed or has a blockage.

Illuminated: WiFi has successfully connected.