Instruction Manual

13
EN
Specications
Product MODA ONE S SERIES
Voltage 120V, 60Hz
Rated Power 1400W
Troubleshooting
Problem Possible cause Solution
The machine does
not turn on
1. No power
2. Reset button is not
pressed
1. Check and insert
the power plug
rmly into the
socket
2. Press the Reset
button
During use the
LED Loop
blinks red
Machine overheating,
under overvoltage
protection, etc.
After cooling down,
check and remove
the blockages from
air inlet/outlet and
then restart
The power cord/plug
gets very hot
Power cord/plug
maybe damaged
Please stop using the
machine and contact
Customer Service
Smell of burning
from the dryer
Internal components
are damaged
Buttons unresponsive Button is damaged
Note:
If the above troubleshooting guide fails to provide a solution, please
contact us at [e-mail] or visit our website www.tineco.com
for further support.