SERIES Smart Vacuum Cleaner Instruction Manual Manual De Uso Mode D’emploi *Actual product may differ from illustration.
Important Safety Instructions............................................................... 2 Overview................................................................................................ 5 Accessories............................................................................................ 7 Assembly ............................................................................................... 9 Operation .......................................................................................
Important Safety Instructions SAVE THESE INSTRUCTIONS Household use only. EN When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING – To reduce the risk of fire, electric shock, or injury: 1.
FCC Supplier’s Declaration of Conformity Tineco / PURE ONE S12 SERIES 4 64 " 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 74 64 74 $" 5IJT BQQMJBODF DPNQMJFT XJUI QBSU PG UIF '$$ 3VMFT 0QFSBUJPO JT TVCKFDU UP UIF GPMMPXJOH UXP DPOEJUJPOT 5IJT BQQMJBODF NBZ OPU DBVTF IBSNGVM JOUFSGFSFODF BOE UIJT BQQMJBODF NVTU BDDFQU BOZ JOUFSGFSFO
$IBOHFT PS NPEJGJDBUJPOT OPU FYQSFTTMZ BQQSPWFE CZ UIF QBSUZ SFTQPOTJCMF GPS DPNQMJBODF DPVME WPJE UIF VTFS T BVUIPSJUZ UP PQFSBUF UIF FRVJQNFOU EN Note: This equipment has been tested and found to comply with the limits for a Class B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EN Overview A B C D E F G H I J K L M A. Dust sensor G. Trigger lock B. Digital display H. Dustbin release button C. Dust empty release button I. Trigger D. Dustbin J. Power control slider E. AUTO mode K. HEPA release button F. WiFi reset button L. Battery release button M.
EN Digital Display A B C D E F G H I J A. Battery icon E. Air channel blocked B. Brush roller tangled F. Dust sensor malfunction C. Dust monitoring loop G. Power indicator (Blue to red according to the dust H. Tineco logo amount) I. WiFi indicator D. AUTO mode J.
Accessories Note: Direct-drive LED multi-tasker power brush Direct-drive technology increases cleaning efficiency and ensures a highly dynamic clean; very effective for cleaning fine dust and debris on the carpet and hard floor. LED headlights help you clean the hard-to-see spots. Mini power brush For vacuuming upholstered furniture, mattresses etc. Vacuums pet hair and removes ingrained dirt. 2-in-1 dusting brush Switches between a wide and a soft brush by pressing the release button.
Flexible long crevice tool Easy to bend, easy to reach tight spots. Suitable for cleaning dust behind and beneath furniture, around refrigerators, and many other tight gaps. Full-size LED soft-roller power brush EN Perfect for hard floors, especially sensitive wood floor. Picks up coarse and fine dirt at the same time. Multi-angle folding tube An articulated joint makes it adjustable to allow for flexibility when cleaning from high to low.
Assembly Insert tube. Press the release button and remove tube. Brush Installation Insert the power brush. Press the release button and remove power brush. Dustbin Installation ø ù To clean the dustbin more thoroughly, press the dustbin release button to fully detach from the appliance. When re-attaching the dustbin, hold on an angle and slot the top of the dustbin into the hook on the main body. Push upwards until the hook is fixed into the slot on the dustbin and then it clicks into place.
EN Battery Installation Press the battery release button, and remove the battery. To replace, slide the battery into the slot at the base of the main body. The battery will click into position when correctly fitted. Wall-mounted Dock Installation 47.25" (120cm) click Determine the best wall location for mounting the dock. We recommend placing it 47.25” (120cm) from the lower screw hole to the floor (may need to be adjusted based on the actual situation).
Operation Preparing for Use Note: EN • Before the first use, please charge the appliance (see “Charging the Battery”) for 3-4 hours in an area where the ambient temperature is between 39.2°F (4°C) and 104°F (40°C). • Select an accessory and attach it to the appliance before use (see “Accessories”). Pull the trigger to activate the suction. Pull the trigger lock to hold the trigger for continuous power mode.
Cleaning Mode Selection AUTO Mode • In AUTO mode, the power indicator and the color of dust monitoring loop change according to the amount of dust detected. A red dust monitoring loop indicates more dust is detected whereas a blue loop indicates less is detected. This mode automatically provides the best cleaning solution. EN Clean: On Min Power Vary depending on dust amount Heavy dirt: On Max Power • Keep sharp objects away from the digital display to avoid scratches and scrapes.
Manual Mode EN Power up Power down From AUTO mode, swipe the power control slider to switch to Manual mode. In Manual mode, you can control the power as needed. Note: Only use with dry hands. Dirty hands may affect slider operation.
APP • All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play and Tineco Official Site. App Downloads www.tineco.com Download on the GET IT ON App Store Google Play Tineco EN Support App Downloads iOS 9.0 or later Android 5.0 or later App Function Introduction Battery Battery level in real time. Cleaning Performance 0 /0 dust min Total dust: 0 dust/0 min Cleaning report Displays the dust amount, working hours and working status.
Press the release button on the side of the dustbin and empty the contents. Close and click the dustbin flap back into place. • Place the appliance on the wall-mounted dock for convenient storage and recharging after use. click ø ù Place the main body on the dock. To avoid bristle damage, always place attachments on the dock after use.
Charging the Battery • When secured on the wall-mounted dock, the battery attached to the main body will charge first, followed by the spare battery. EN * spare battery included in selected models Connect the adaptor to the dock and outlet. To charge, secure the main body and/or the spare battery on the dock. The battery can be recharged while attached to the main body, or separately. Note: • If you need a spare battery, please purchase from Tineco.
Runtime • When in AUTO mode, the runtime is approximately 50 minutes. When MAX power is used, the runtime is approximately 10.5 minutes. (for one battery) • Estimated runtime data was obtained by a Tineco Laboratory using one battery and non-motorized accessories. Charging Time • A full charge takes approximately 3-4 hours for one battery. • Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C).
Illuminated: WiFi has successfully connected. Blinking: WiFi is connecting. EN Off: WiFi is not connected, please connect. During Charging • The spare battery will only charge when the one attached to the main body has been fully charged (spare battery included in selected models). Charging (Battery level 0%~99%) Battery on the main body Battery icon: solid green. Battery indicator: blinking green. Tineco indicator: blinking.
Maintenance Note: • Clean the dustbin and filters after each use. • Use the cleaning tool to thoroughly clean the pre-filter when the indicator light shows a blocked air channel. To maintain high performance, wash and dry the pre-filter monthly, replacing it every 6 months. Wash and dry the HEPA filter every 3 months, replacing it every 12 months. 1 2 Press the dustbin release button to remove the dustbin.
EN Pre-filter Ensure the appliance is switched off before cleaning, and remove the dirty pre-filter from the mesh filter-holder. Do not turn the appliance upside down when removing or installing the filter to prevent dust from entering the motor. Replace a clean filter to the main body. Put the dirty pre-filter into the cleaning tool and connect the cleaning tool to the main body. Activate the suction to clean the pre-filter. The appliance will automatically switch off after once cleaning is completed.
EN The HEPA filter can be washed under running water and must be completely dry before reinstalling. Dust Sensor To avoid dust accumulation which can affect cleaning performance, wipe the suction mouth with a damp cloth. Mini Power Brush Press against the roller end cover downward. Pull out the brush roller.
click Fully reinsert the brush roller at an angle and push upward until it clicks securely back into place. EN Remove the debris wrapped around the roller with the Tineco Hair Cleaning Tool. Brush Roller Slide the switch to open the brush roller end cover, and rotate it counter-clockwise to be able to pull out the brush roller. After removing the brush roller, gently clean the brush window and suction mouth. Remove the debris wrapped around the roller with the Tineco Hair Cleaning Tool.
Product PURE ONE S12 SERIES Voltage 21.6V Rated Power 500W Dustbin Capacity 0.6L Charging Time 3-4 hrs for one battery AC Input 100-240V~ WiFi Frequency Bands 2.4G WiFi Maximum Output Power 19dB Disposal • The battery contains materials that are harmful to the environment and must be removed from the appliance before it is discarded. • When removing the battery, the appliance must be powered off.
Troubleshooting Problem Solution No power Charge the battery Auto protection for overheating Restart after cooling down The suction mouth is blocked Check and remove blockages Dustbin and filters are full Clean the dustbin and filters The pre-filter is not installed Install the pre-filter The appliance is blocked (i.e. the tube, suction mouth or some other parts) Remove blockages The brush roller tangled with hairs or fibers Clean the brush roller The appliance is blocked (i.e.
Problem Possible cause Solution The brush roller is blocked Remove blockages Power indicator blinking Motor failure Remove blockages, or restart Air channel blocked indicator blinking The appliance is blocked, or full of dust in filter and dustbin Remove blockages, clean the filter and dustbin Dust sensor malfunction indicator blinking 1. The sensor inside the dustbin is blocked 2. The dustbin is not installed 1. Clean the dust on the inner sensor 2.
Warranty 2-YEAR LIMITED WARRANTY • Only applies to purchases made from authorized retailers of Tineco. • Is subject to the adherence of the requirements outlined in this instruction manual, and is subject to further conditions outlined below. EN WHAT IS COVERED? • Your Tineco appliance has a 2-year warranty against original defects in material and workmanship, when used for private household purposes in accordance with the Tineco Instruction Manual.
WARRANTY LIMITATIONS • Any implied warranties relating to your appliance including but not limited to warranty of merchantability or warranty of fitness for a particular purpose, are limited to the duration of this warranty. • Warranty coverage applies to the original owner and to the original battery only and is not transferable. • This limited warranty gives you specific legal rights. You may also have other rights which vary by region.
CONTENIDO Medidas importantes de seguridad ................................................. 29 ES Descripción general ........................................................................... 32 Accesorios ........................................................................................... 34 Montaje ............................................................................................... 36 Funcionamiento ..................................................................................
Medidas importantes de seguridad CONSERVE ESTAS INSTRUCCIONES Solo para uso doméstico. Al usar aparatos eléctricos se deben seguir siempre una serie de medidas básicas de seguridad, entre ellas las siguientes: LEA TODAS LAS INSTRUCCIONES ANTES DE USAR ESTE APARATO. De no seguir todas las advertencias e instrucciones, se podrían producir descargas eléctricas, un incendio y/o lesiones personales graves. lesiones: 1.
ES apagado antes de conectar la batería, tomar el aparato o desplazarlo. Llevar el aparato con el dedo en el interruptor o activar el aparato con el interruptor en posición de encendido puede originar accidentes. 15. Desconecte la batería del aparato antes de realizar ajustes, cambiar accesorios o almacenarlo. Tales medidas preventivas disminuyen el riesgo de poner el aparato en funcionamiento por accidente. 16.
interferencia recibida, incluidas aquellas que puedan causar una operación no deseada. Nota: Este equipo ha sido probado y se ha determinado que cumple con los límites de un aparato digital de Clase B según lo estipulado en la sección 15 de las normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra las interferencias perjudiciales en una instalación residencial.
ES Descripción general A B C D E F G H I A. Sensor del polvo J K L M H. Botón de liberación del depósito de polvo B. Pantalla digital C. Botón de liberación de vaciado del polvo D. Depósito de polvo I. Gatillo J. Deslizador de control de encendido K. Botón de liberación del filtro HEPA E. Modo AUTO F. Botón de reinicio de Wi-Fi L. Botón de liberación de la batería (retire el depósito para acceder) G. Bloqueo de gatillo M.
ES Pantalla digital A B C D E F G H I J A. Icono de batería E. Canal de aire obstruido B. Cepillo de rodillo enredado F. Sensor de polvo defectuoso C. Bucle de la monitorización de G. Indicador de alimentación polvo (azul o rojo según la cantidad H. Logotipo de Tineco de polvo) I. Indicador de Wi-Fi D. Modo AUTO J.
Accesorios Nota: • Pruebe un accesorio en un área pequeña y poco visible antes de usarlo sobre superficies sensibles. • El embalaje muestra los accesorios incluidos con su compra. • Como se ilustra abajo, hay muchos componentes compatibles con este modelo. Si necesita más accesorios, visite www.tineco.com o store.tineco.com.
Accesorio largo flexible para ranuras Fácil de doblar, facilita llegar a lugares más estrechos. Adecuado para limpiar el polvo de detrás y debajo de los muebles, alrededor de frigoríficos y muchos otros espacios estrechos. Cepillo eléctrico de rodillo suave de tamaño normal LED Tubo plegable de múltiples ángulos Una junta articulada permite ajustarlo para permitir flexibilidad al limpiar de alto a bajo. Manguera de extensión flexible Extensión y flexibilidad excelentes para alcanzar lugares difíciles.
Montaje Instalación del tubo ES Inserte el tubo. Presione para liberar el botón y sacar el tubo. Instalación del cepillo Inserte el cepillo eléctrico. Presione el botón de liberación y retire el cepillo eléctrico. Instalación del depósito de polvo ø ù Para limpiar el depósito de polvo mejor, pulse el botón de liberación del depósito de polvo para desacoplarlo completamente del aparato.
Instalación de la batería Deslice la batería en la ranura de la base del cuerpo principal para volver a colocarla. La batería se enganchará en su lugar cuando esté correctamente colocada. ES Presione el botón de liberación de la batería y, luego, sáquela. Instalación del puerto de montaje en pared 120cm clic Determine la mejor ubicación para montar el puerto.
Funcionamiento Preparación para el empleo Nota: ES • Antes del primer uso, cargue el aparato (consulte “Carga de la batería”) durante 3-4 horas en un área donde la temperatura ambiente sea de entre 4 °C (39,2 °F) y 40 °C (104 °F). • Seleccione un accesorio y acóplelo al aparato antes de usarlo (consulte “Accesorios”). Presione el gatillo para activar la succión. Presione el bloqueo de gatillo para mantener el gatillo en modo de acción continua.
Selección del modo de limpieza Modo AUTO • En modo AUTO, el indicador de alimentación y el color del bucle de monitorización de polvo cambian según la cantidad de polvo detectada. Si el bucle de control de polvo es de color rojo, indica que se detecta más polvo, mientras que, si es azul, se detecta menos suciedad. Este modo proporciona automáticamente la mejor solución de limpieza.
Modo manual Encendido ES Apagado En modo AUTO, deslice el control de encendido para entrar en modo manual. En modo manual, puede controlar la potencia según sea necesario. Nota: Utilícelo solo con las manos secas. Usarlo con las manos sucias podría afectar al funcionamiento del deslizador.
Aplicación • Todas las funciones se pueden realizar con la aplicación Tineco. Descargue la aplicación Tineco en el App Store, la tienda Google Play o el sitio web oficial de Tineco. Descargas de aplicaciones Bájela de DESCÁRGUELA DE App Store Google Play Tineco www.tineco.com Asistencia iOS 9.0 o superior Android 5.0 o superior Introducción de las funciones de la aplicación Batería Nivel de la batería en tiempo real.