User Manual

Blurred image displayed on your phone after successful
connection
Problems and Solutions
Slightly move TinyScopeCAM up and down to adjust the
distance between the lens and object;
The lens is stained, please observe after wiping the lens
according to the safety instructions in this manual.
For hareware problem,please contact the retail store.
The selected resolution is relatively higher,and the frame
rate isrelatively lower, it is recommended to select 1920 * 1080;
Close other applications.
The image is unclear when observing the slides/with liquid
samplers in bright or dark field illumination.
The front side is where texts are readable from left to right;
please aim the front side and the sample area at the lens;
The front side of the sampler is stained, please wipe and clean
it before observation.
No window pop up after correct connection.
Please restart your phone/PC and follow [How to use ] Page to
operate again;
Close TinyScopeCAM APP and other similar USB camera
application, and then plug TinyScopeCAM in again.
Image lag
TinyScopeCAM is overheat，Please pause and wait for the
machine temperature to drop before using again;
Blank screen after connection
TinyScopeCAM is not properly connected to the phone,
please reconnect the phone to TinyScopeCAM;
11