Datasheet

www.tinysine.com
25
More WiFiBee setting method please visit:
http://www.tinyosshop.com/index.php?route=information/news&news_id=26
Controlled by computer
(1) Make sure the configuration switch is in “Normal” position and choose power mode as
DC, here we use a DC 5V power. Here we use Realterm to send commands.
(2) Open Realterm, set Port as “192.168.1.185:2000” then click Open, you will get
response “2A48454C4C4F2A01”(ASCII is *HELLO*) which means you have connected to
TOSR14x .
(3) Now you can control TOSR14x , but you still need to verify password, only when you
have input the correct password, you can control TOSR14x .