User manual

MODBUS Master 13
English
2.3 Energy counter management
To change the module serial parameters (in case of an RS485 MODBUS module) or manage the device partial
counters, select Device Setup tab.
Pict. 6 – Serial parameters and partial counters management (Device Setup for serial communication)
In Device Setup page, it is possible to change the following communication parameters of the RS485 MODBUS
module: Modbus Address, Modbus Mode, communication speed (Baudrate).
After parameters setup, confirm the changes with Apply key.
In case of LAN communication, the Change parameters area is disabled (Pict. 7).