User manual

14 MODBUS Master
English
Pict. 7 – Partial counters management (Device Setup for LAN communication)
Under Change parameters area, area for Partial counters management is shown.
In this area it is possible to start/stop/reset the partial counters of the connected device.
In Partial counter field, select the partial counter which must carry out the operation. Available choices:
PARTIAL COUNTER MEANING
+kWhSYS-PAR
System imported active energy
-kWhSYS-PAR
System exported active energy
+kVAhLSYS-PAR
System imported lagging apparent energy
-kVAhLSYS-PAR
System exported lagging apparent energy
+kVAhCSYS-PAR
System imported leading apparent energy
-kVAhCSYS-PAR
System exported leading apparent energy
+kvarhLSYS-PAR
System imported lagging reactive energy
-kvarhLSYS-PAR
System exported lagging reactive energy
+kvarhCSYS-PAR
System imported leading reactive energy
-kvarhCSYS-PAR
System exported leading reactive energy
ALL
All partial counters
Then, select the operation (Start, Stop, Reset) in the Operation field.
To confirm the choices, press Apply key.