User manual

14 Web server • LAN GATEWAY
English
Settings
This area is reserved to Administrator.
This section allows to display and change LAN GATEWAY settings.
Parameters area
IP Address LAN GATEWAY IP address specication. It has to be a valid number coherent with LAN/Intranet (the default
value is 192.168.1.253). To congure more than one LAN GATEWAY, perform one per time and assign
different name and IP for each device.
Subnet Mask Mask of the subnet that involves the LAN GATEWAY.
Gateway Gateway IP connected to the LAN GATEWAY for communication through different networks.
Primary DNS Primary DNS server address.
Secondary DNS Secondary DNS server address.
Protocol This setting is xed and cannot be modied. Protocol selection.
NTP Time Server NTP time server address.
UTC Time Correction Time correction respect to UTC (accepted values: -12...+13).
FW Version LAN GATEWAY rmware version.
HW Version LAN GATEWAY hardware version.
Serial Number LAN GATEWAY serial number.
Change key It allows to change the current parameters.
Default key It allows to restore the default settings. A conrming message is displayed. Press Yes and then enter
Administrator Username and Password.
Services area
Date and time LAN GATEWAY date and time.
SSH Socket Secure Shell.
Change key It allows to change LAN GATEWAY date and time.
Enable key Enable a secure channel for remote assistance by technical support service. After enabling, always carry
out a reboot by pressing Reboot key.