User manual

Web server • LAN GATEWAY 7
English
Introduction
LAN GATEWAY is a device which allows to manage a single energy counter by any PC connected to LAN/Internet by means of a simple
web browser.
LAN GATEWAY web pages are designed to be cross browser compliant: Internet Explorer 7, Internet Explorer 8, Mozilla Firefox 3.xx,
Apple Safari, Google Chrome, Opera, Netscape navigator are all supported web browsers.
LAN GATEWAY web pages are provided with Ajax technology to update data in real time.
With Ajax, web applications can read data from the server asynchronously in the background without interferring with the display and
behavior of the existing page. The use of Ajax techniques has led to an increase in interactive or dynamic interfaces on web pages and
better quality of web services due to the asynchronous mode.
LAN GATEWAY can be upgraded directly from the web server.
How to access LAN GATEWAY web server
LAN GATEWAY web server can be accessed by any PC connected to LAN/Internet.
LAN GATEWAY web server has been designed for two user type:
Administrator• : full LAN GATEWAY web server use. It can manage the counter, carry out LAN GATEWAY setup, upgrade and
manage its access accounts.
User• : limited LAN GATEWAY web server use (possibility to have up to 20 User accounts).
Available functions Administrator User
Display measurements
 
Download measured data recordings
 
Enable (parameter selection) or delete measured data recordings

Display counter status information
 
Change LAN GATEWAY settings

Upgrade LAN GATEWAY

Manage web server access accounts (Administrator, User)

Start/stop/reset partial counters

LAN GATEWAY web server access can be carried out only by entering Username and Password relevant to the own account
(Administrator or User). According to the entered Username and Password, LAN GATEWAY will display the available functions.
NOTE: It is suggested to carry out the first LAN GATEWAY web server access by a person who will hold the Administrator
account.
To access LAN GATEWAY web server, turn on a PC and follow the instructions:
Run the Internet browser (e.g.: Internet Explorer, Mozilla Firefox) and type 1. 192.168.1.253 in the web address eld.
Type in the relevant elds Username and Password (in case of rst web server access, Username: admin, Password: admin).2.
Conrm with 3. Login key and the web server Home page will be displayed.
NOTE: For a safety LAN GATEWAY web server use, change and customize Username and Password for Administrator and
User accounts (refer to chapter LAN GATEWAY web server structure, section Users).
WARNING: After the rst access, it is important to change the LAN GATEWAY IP address (refer to chapter LAN GATEWAY
web pages structure, section Settings).